| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Engine/Hybrid System | Section: Fuel System | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000002H8B00AX |
| Title: 3UR-FE FUEL: FUEL PRESSURE REGULATOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL FUEL PRESSURE REGULATOR ASSEMBLY
(a) Apply a light coat of gasoline or spindle oil to a new O-ring, and install it to the fuel pressure regulator.
NOTICE:
- Make sure that there are no scratches or foreign matter in or around the insertion hole of the delivery pipe.
- When inserting the fuel pressure regulator, be careful not to damage the O-ring.
|
(b) While turning the pressure regulator left and right, install it to the fuel delivery pipe. |
|
(c) Install the 2 bolts. Torque: 10 N·m (107 kgf·cm, 7 ft·lbf) |
|
(d) Connect the vacuum sensing hose to the pressure regulator. |
2. INSTALL NO. 2 FUEL TUBE SUB-ASSEMBLY
3. INSTALL AIR CLEANER HOSE ASSEMBLY
4. INSPECT FOR FUEL LEAK
5. INSTALL V-BANK COVER
|
|